How To Replace The Fuel Filter Car

How To Replace The Fuel Filter Car

The fuel filter is a component of the economic engine, which cost $ 10-20. However, low-cost components is a vital part of the engine. Protects the engine of thousands of dollars in damages to protect sensitive engine parts, such as the carburetor and fuel injection. Therefore, it is necessary to operate the fuel filter.

Replacing the fuel filter is very easy to do. You do not need to be a professional mechanic to do it and it only takes a few minutes to do. If you regularly use your car, replacing the fuel filter at least once or twice a year. You must remember that this should be part of the schedule for your car regularly maintained and should not be overlooked.

The first step in replacing your fuel filter is to relieve the pressure of the fuel system. This is very important as it is for safety to prevent engine damage, and injury. If you have recently used your car, you need to get the engine to cool completely first. You should also put on eye protection before you relieve the pressure on the fuel system.

If the pressure is released, the output of high pressure to unscrew the fuel could cause an explosion or fire. To relieve pressure on the fuel system must locate the fuse for the fuel pump or relay that powers the fuel pump. Finding these things is necessary to start the vehicle. While the engine is running, remove the fuse or relay. You know if you have taken the good and the engine will die quickly pulling the fuse or relay to exit the fuel line and fuel filter without pressure.

The next step is to disconnect the fuel line fuel filter. If your car is one of the later models may have a fuel injection system. It takes two keys are the right size for proper fuel filter. Remove the accessories.

After this step, you will now be able to remove the old fuel filter. You must remember that the filter can be held by a clamp. You can usually get the fuel filter from the terminal using a screwdriver. Lift the old fuel filter carefully because it can always be full of gas.

The next step is to replace the fuel filter washers. These washers are designed to withstand high pressure and usually made of copper or aluminum. You must remove the old and replace it with a new equivalent.

The final step is to place the new fuel filter. Installing a new fuel filter is easy. E 'in front of the removal process. When you receive a new filter installed, now you're ready to go. Just do not forget to put the fuel pump fuse or relay it back before starting the car. When a new fuel filter, you can keep the engine of your car and get better gas mileage.