How To Fix Paint Chips

How To Fix Paint Chips

Every car owner knows that paint chips in their car paint is an ugly spectacle to behold. That's why you do everything to prevent the car from a few chips or scratches in the paint. But it is inevitable that the paint has chipped your car, sooner or later, no matter how careful you are. It can be from a cart in the parking lot of the mall, or it can be an awkward car driver by the side of your car and hit the car, he or she opens the door.


Now that you have this chip villain in your car, you can then go to The Body Shop to get an estimate to repair the damage. You then have a rough estimate that could cost you hundreds or even thousands of dollars in repairs and labor.

If you do not want to spend that much to repair a small chip in your car, you can do it yourself. You just need to get closer to the color of paint, which can match the car's paint.

Remember that you should always paint repair on sunny days or when it is over 70 degrees outside. However, if you do it in a very hot, as you get on a hot summer day in Nevada or Arizona, done early in the morning to prevent the paint from drying too fast.

When repairing chips, you must mask the area around the chip using adhesive tape. Then clean the area with lacquer thinner or alcohol to free it from dirt, wax and dirt from the road. It is important that you never use a dirty rag or paper towel or cloth. Clean with a clean, lint-free cloth.

If the chip is deep or not all the way to metal, you must use a grain sandpaper 40 to the height of the metal. This will allow the primer and paint to have something to cling to. It is also important to remember that you must ensure that no rust in the affected area. If so, should be cleaned as well.

Using the applicator brush or a toothpick, it is now necessary to cover the bottom of the bare metal. It 'important to make sure you get a good paint primer. Only the paint to bare metal. After all this is that you want a smooth layer, and barely enough to cover the primer and paint to bare metal. Since then let it dry for at least 24 hours.

After that, you must now apply the paint chipping area. Gradually add bits of paint thinner to the paint before applying it. While it is too thick, add a few drops of paint thinner. Then apply it to the affected area.